What is Maglube Micro Lubrication

Traditional means of machining lubricants are petroleum or synthetic base products that typically mix 10 to 20 parts with water to flood the work-piece and tool to prevent heat.  These traditional machining lubricants are also known as metalworking fluids or flood coolants. While they have little lubricating properties, the concept is to cool the tool and work-piece by means of quenching or carrying the heat away after it has already occurred.      

Maglube works to prevent heat from occurring by eliminating friction.  Our lubricants are environmentally safe organic oils that are as much as 300 times higher in lubricity than conventional cutting oils.  Maglube  lubricants are distributed directly to the cutting edge of the tool before the cut is made to the work piece with our precision  delivery systems.  This eliminates the need for quenching due to the lubricating properties of Maglube, any  heat is displaced through the chip. There are no fumes, no mist in the air and no cleanup of the work piece because  99.9 percent of the lubricant is consumed in the cut. 

 Maglube uses as little as  1-1/2 oz per day in most applications. 

Call us and find out how we can:  

• INCREASE YOUR TOOL LIFE

• KEEP YOUR WORKPLACE CLEAN

• DECREASE YOUR AMOUNT OF DISPOSABLE WASTE

• SAVE YOU TIME AND MONEY

MANUFACTURERS ALLIANCE GROUP, INC.

1535 Oak Industrial Lane

Suite I

Cumming, GA 30041